Photovoltaic Gutter System Roll Forming Machine
Photovoltaic gutter system roll forming machine is the automatic mass production of various specifications, thickness of photovoltaic solar house surface water channel equipment.
Request A QuoteAs an important part of the photovoltaic power generation system, the photovoltaic support tank produced by the photovoltaic water guide system equipment is mainly used to carry photovoltaic modules and maintain the stability and safety of the components. At the same time, the sink can also play a role in collecting and discharging rainwater to protect the photovoltaic modules from rain erosion.
The advantages of photovoltaic flume include:
一、 improve the efficiency of photovoltaic power generation
The main function of the photovoltaic sink is to dissipate heat. Since the efficiency of solar panels decreases as the temperature increases, reducing the temperature of the panels can improve the efficiency of photovoltaic power generation. According to statistics, the use of photovoltaic sinks can improve the power generation efficiency of panels by 5% to 20%.
二、reduce the temperature of photovoltaic equipment
Through the flow of water, the heat generated by the photovoltaic equipment is dissipated, reducing the temperature of the equipment, thereby improving the service life and stability of the equipment. At the same time, due to the circulating water flow through the sink, it can effectively prevent the accumulation of impurities such as dust on the photovoltaic panels, and play a role in protection and cleaning, greatly reducing the cost of maintenance and cleaning.
三、extend the service life of the equipment
The photovoltaic sink can also reduce the temperature and load of the photovoltaic panels, thereby reducing the risk of damage and aging of the panels, extending the service life of the equipment, and reducing the cost of subsequent maintenance and replacement.
Working principle of Photovoltaic Gutter System Roll Forming Machine
Uncoiling → Feed and smooth → rolling molding → hydraulic punching (optional) → length cutting → finished product discharge
Photovoltaic water channel system equipment is divided into six categories
- longitudinal small sink frame equipment
- horizontal small sink frame equipment
- the middle sink frame equipment
- ridge sink frame equipment
- the main sink frame equipment
- M-type sink frame equipment
The parameters of these devices are similar, but the shape of the version is different, and then we will comprehensively introduce these devices.
Decoiler ( Selectable configuration ):
( Standard configuration ): Manual simple decoiler;
(Optional configuration ): Hydraulic decoiler;
Loading Lecel: 5tons(common), 8tons, 10tons, 15tons or as requirement;
Loading Width: Max. 1250mm or 1450mm (common);
Loading Inner Diameter: φ450-550mm;
Loading Outer Diameter: Max φ1500mm；
Roll forming system:
- Feed leveling device: consists of seven leveling shafts, two feeding shafts and guide wheels, three upper parts and four lower parts. The shaft is tempered and heat treated, and the surface is polished and hard chrome plated.
- Molding row number: 12 groups or 14 groups or 16 composition type (select according to demand);
- Transmission type: chain drive (ordinary) or gearbox drive (according to design);
- forming machine structure: medium plate (ordinary) or arch type (according to demand);
- roller :GCr15 or Cr12 (according to design);
- axis :45# or 40Cr; 50mm/60mm/70mm (according to design);
- punching device: punching after forming, punching specifications provided by customers (customizable);
Cutting type：
- cutting mode: hydraulic cutting;
- tool blade material :Cr12 or GCr12MoV, quenching process, hardness HRC58-62 (according to demand);
- Working mode: fixed size cutting after forming;
Control system:
PLC system: Delta brand
Length controller: Cosenter or Omron encoder
Operation: touch screen
Inverter: Delta brand
Voltage :380 v / 50 hz/3P (according to customer requirements)
Our company has rich experience in the design of roll forming machine. For the forming machine equipment, we adopt advanced production technology and processing technology, so that the forming machine we produce has the characteristics of simple operation, stable and accurate production capacity, which can greatly improve production efficiency and product quality, and reduce labor input and production cost.
Our company to provide customers with professional and efficient after-sales service and one-stop solutions! Our after-sales service purpose is the fastest way to solve the problem, the best way to solve the problem, the best attitude to solve the problem.
Application of Photovoltaic Gutter
