Standing seam roof panel roll forming machine
Portable vertical seam roofing board machine is a kind of automatic mass production of vertical seam roofing board in the width range of 290mm-600mm.
Standing seam roof panel roll forming machine also can be called Portable vertical sewing roof plate machine.
Portable vertical seam roof panel machine is also known as low vertical edge forming equipment, is a good mobile vertical seam forming machine, very suitable for workshop and field operation. The PLC control system is located on one side of the device and is used to adjust the fixed length and quantity of the product.
Compared with traditional large-scale equipment, standing seam roof panel roll forming machine is small in size, light in weight and easy to move. For this portable machine, you can use it as a production line, or you can use it alone.
Different part of Standing seam roof panel roll forming machine
Main component
1、Decoiler
2、Feeding Guide
3、Roll Forming System
4、Cutting unit
5、Control system
6、output table
Technical Parameters
| No. | Item | Parameter | Remark | |
| 1 | Material | Type | Galvanized Coil and Color steel coil | As requirement |
| Thickness of Material | 0.5-1.0mm | As requirement | ||
| 2 | Material Width | 290-600mm | As requirement | |
| 3 | Production Speed | ommon speed: 0-15m/min | Adjustment | |
| 4 | Effective Width of Product | 220-530mm | According to drawings | |
| 5 | Axis Diameter | 70/80mm | As design | |
| 6 | Forming Roller station | 6/8 groups | As design | |
| 7 | Roller Material | 45# or GCr15 | As design | |
| Hard Chrome Coated,heated and quenched | ||||
| 8 | Main Axis material | First grade 45# steel | As design | |
| 9 | Drive Type | chain-drive | Selectable | |
| 10 | Motor Power | 4.0kW or 5.5kW | As design | |
| 11 | Cutting Device | Cutting type：Hydraulic stop cutting | As requirement | |
| Cutter Blade Material: Cr12, Quenching process, hardness HRC58-62; | ||||
| 12 | Brand of Electric Control System | Delta or Siemens or Schneider | Selectable | |
Standing seam roof panel picture
Sometimes the vertical seam roof plate also needs to be bent, then you need the vertical seam roof plate bending equipment, if you need to tell us together!
Two type of working principle
一、When the equipment is used alone: manual feeding → rolling molding → hydraulic length cutting – output table
二、When the equipment is used in the production line: uncoiling → feeding → rolling forming → hydraulic length cutting – output table
More type of drawing seam roof panel
Application areas
